• Rubber Boot protects against knocks and hits
• Easy-To-Read Display
• Customised LCD screen
• Tactile Keypad with a simple, straight forward design for easy operation
• Compact Design Fits Your Palm Perfectly - Designed for easy single-hand operation
• Convenient Benchtop Stand
• User-Friendly Diagnostic, easy to understand trouble-shooting prompts
• Splashproof & Shock-Resistant Built with shock-resistant
• ABS plastic and protected by an IP54-rated housing against accidental splashes
• Hold function freezes readings momentarily for easy viewing and recording
• Energy and Cost Saving - Switches off automatically after 20 minutes of inactivity
• Automatic Temperature Compensation
• Accurate readings, even under varying temperature conditions
• Non-Volatile Memory -Meter settings are saved, even when batteries run out

• Simultaneous pH and temperature measurements on a large dual-line LCD display
• Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
• Selectable temperature unit (℃)
• Electrode condition indicator
• mV of pH measurement for electrode check
• HI-12963 dedicated pH with an integral temperature sensor
• Probe quick connect system
• Battery life indication and low battery detection
• Keystroke confirmation tone
• Auto-off function
• Waterproof casing IP67

• Up to 6-point calibration with auto-buffer recognition
• Quick, easy electrode diagnosis with multiple pH slopes and offset display
• Calibrate with up to 5 custom pH buffers where use any pH values that are 1.0 pH unit apart
• Cal-due alarm
• Auto-logging function for convenient continuous monitoring
• Password protection for setup and calibration
• All measurements include temperature display
• Up To 500 point memory with date time stamp for GLP
• Output data to printer or PC
• Detachable electrode holder
• Compact footprint
• Custom setup
• 3-Year warranty

• Intuitive operation
• Ergonomic design
• Waterproof
• Large display
• Automatic and manual endpoint recording
• Acoustic endpoint signal
• Visual endpoint signal

• Replacement sensor for the B-713, pH 11, ph 22, pH 33
• Employing the same test principle as standard laboratory electrodes, the LAQUAtwin packs all components into a flat sensor that’s less than 1 mm thick.
• Waterproof construction protects the instrument.

• Simultaneous pH and temperature measurements on a large dual-line LCD Display
• Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
• Selectable temperature unit (℃ or ∞F)
• Electrode condition indicator
• mV of pH measurement for electrode check
• FC2323 dedicated pH with an integral temperature sensor
• Probe quick connect system
• Battery life indication and low battery detection
• Keystroke confirmation tone
• Auto-off function
• Waterproof casing IP67

• Spherical glass tip
• 3.5 connection
• Easy to use
• Glass electrode body
• Double junction reference
• CPS sleeve junction
• 6 months warranty

• Easy to use
• Non-volatile memory
• Large, upright LCD
• Click-lock battery compartment
• Easy push-button calibration
• Transparent protective cap
• ±0.1 % accuracy across full pH range
• Auto-buffer recognition
• Auto-calibration functions
• Long-lasting sensor

• Waterproof - IP67 rated
• CAL Check™
• Automatic or manual temperature compensation
• Calibration
• 200 hour battery life approx - 1.5V AA batteries (x4)
• Clear display
• Auto hold
• Calibration timeout
• PC Connectivity via USB
• GLP
• Intuitive keypad
• Carry case and accessories

Puncture knife, made of stainless steel, for pH measurement of meat, cheese, fruits with a pH electrode model SenTix™ Sp or SenTix Sp-T 900, robust blade with adapted cut-out.

Buy together with XYL-WTW-103730 to use as a puncture knife pH probe.

• Din connection
• Replaceable Electrode
• Application-specific electrode
• Automatic temperature compensation (ATC)
• Stability indicator for accurate data recording

• Simultaneous EC/TDS and temperature measurements on a large LCD display
• Selectable temperature unit
• HI-763063 dedicated EC/TDS temperature probe
• Probe quick-connect system with watertight connection (DIN)
• Battery life indication and low battery detection
• Auto-off function
• Keystroke confirmation tone
• Waterproof casing IP67

• Simultaneous pH, ORP and temperature measurements on a large three-line LCD display
• Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
• User-friendly two-button design
• Selectable temperature unit (℃)
• Electrode condition indicator
• mV of pH measurement for electrode check
• HI-12973 dedicated pH/ORP with integral temperature sensor
• Probe quick connect system
• Battery life indication and low battery detection
• Keystroke confirmation tone
• Auto-off function
• Waterproof casing IP67

• High pH accuracy of ±0.01
• Self-diagnostic messages for easy troubleshooting 
• Measures ORP in addition to pH and Temperature
• Rubber Boot protects gainst knocks and hits
• Easy-To-Read Display
• Customised LCD screen
• Tactile Keypad with a simple, straight forward design for easy operation
• Compact Design Fits Your Palm Perfectly - Designed for easy single-hand operation
• Convenient Benchtop Stand
• User-Friendly Diagnostic, easy to understand trouble-shooting prompts
• Hold function freezes readings momentarily for easy viewing and recording
• Energy and Cost Saving - Switches off automatically after 20 minutes of inactivity
• Automatic Temperature Compensation
• Accurate readings, even under varying temperature conditions
• Non-Volatile Memory -Meter settings are saved, even when batteries run out

Replacement Gel probe for pH1000A meter

• User-friendly two-button design
• Application-specific probe
• Durable IP67 waterproof casing
• Watertight probe connection
• Probe condition indicator