• 1.5 m in length
• Other lengths available
• Waterproof connection between plug and meter (IP67)
• Pressure resistant connection between sensor and cable plug (IP 68, 10 bar)
• Tearproof design

• Easy to use
• Wireless
• Full complete wireless module kit available

• Replacement sensor for the B-741,B-742,B-743,B-341,342,343
• Flat electrode for nitric ion which is so selective that pH or other ions do not affect it.

• Recommended operating temperature: -5 to 70℃
• pH range: pH: 0 to 12
• Glass body material
• Supplied with BNC connector
• Supplied with 1m cable
• Suitable for pH measurement

• Easy to use
• Wireless
• Full flexibility
• Includes rechargeable LiPo-battery
• Splash water protected (IP43)
• Measuring pH, ORP, oxygen, conductivity, turbidity

• Replacement sensor for LAQUAtwin B-722 and Na-11
• Requires a minimum of 0.3 ml sample with direct measurement (0.05 ml with sampling sheet B) 
• Sensor guard has a sliding cap for scooping water sample
• Waterproof

• Replacement sensor for LAQUAtwin B-721 and Salt-22
• Requires a minimum of 0.3 ml sample with direct measurement (0.05 ml sample with sampling sheet B)
• Sensor guard has a sliding cap for scooping water sample
• Waterproof

• Replacement sensor for LAQUAtwin B-731 and K-11
• Requires a minimum of 0.3 ml sample with direct measurement (0.05 ml with sampling sheet B)
• Sensor guard has a sliding cap for scooping water sample
• Waterproof

• pH measuring range 0 to 14
• Gel electrolyte
• Plastic shaft
• Integrated temperature sensor
• Safely measured values due to signal processing in the sensor
• Easy electrode replacement thanks to calibration data stored inside sensor
• Sensor quality monitoring by QSC function
• Memory for 10 calibration records
• QSC function

Replacement sensor for ELITEPH Tester

• pH measuring range 0 to 14
• IDS pH combination electrode with gel electrolyte, plastic shaft and integrated temperature sensor
• Safely measured values due to signal processing in the sensor
• Easy electrode replacement thanks to calibration data stored inside sensor
• Sensor quality monitoring by QSC function

Calibration and maintenance set with technical buffer solution for gel electrodes, 3 bottles with 1 l each: pH 4.01/ 7.00/ 10.01 Trace, 2 bottles with 250 ml 3 mol/l KCl solution.

• Replacement sensor for LAQUAtwin Salt-11
• Requires a minimum of 0.12 ml sample
• Corrosion-resistant titanium / platinum black cell material
• Waterproof

• 514-22 1.41 mS/cm (1413µS/cm) Conductivity Standard Solution 
• 14-ml x 6 bottles
• For LAQUAtwin B-771, EC-11, EC-22, EC-33

• Replacement sensor for LAQUAtwin B-771, EC-11, EC-22, and EC-33
• Requires a minimum of 0.12 ml sample
• Corrosion-resistant titanium / platinum black cell material
• Waterproof

• Stainless steel blade
• 3.5 connection
• easy to use
• PVDF construction