The Zahm & Nagel CO2 Tester is a piercing device used to test carbonated beverages for volumes of CO2 gas in glass/PET bottles and cans. The Series 6000 Piercing Device will provide a rapid and accurate determination of gas volumes in alcoholic and non-alcoholic beverages when used with the two pressure/temperature charts furnished with the instrument.
Benefits
Fast measurement of CO2 in sealed bottles and cans
Dual scale pressure gauge (0-60 psi and 0-4.2kg/cm2)
Available in one and three-litre sizes
Adjustable 2 dial thermometer (25/125℉ and -5/55℃)
Works with both alcoholic and non-alcoholic beverages
ZN-6000CO2
Our standard delivery is 3-5 working days (where products are available) Monday to Friday, excluding public holidays when you order by 2pm. Details of our returns and cancellation policy can be found in our Returns Policy & Section 11 of our Terms and Conditions. For more information please contact us on 01924 444 577 or Email Us.
The Combi-spin is supplied as standard with two interchangeable rotors for 12x1.5ml and 12x0.5ml + 12x0.2ml microtubes
Optional accessory rotors - for 16 and 18 microtubes and for two 8-well 0.2.ml strips - allow for quick and easy changes of application
Capacity: 12 x 1.5ml microtubes
Centrifugation 2800rpm at 50Hz and 3500rpm at 60Hz
The vortex cup emerges through an opening in the closed lid, enabling individual tubes to be mixed while a full load of tubes is spinning
Capacity: 12 x 0.5ml plus 12 x 0.2ml microtubes
Very simple to operate - use the left-hand button to select continuous or short spin. A safety interlock stops the rotor when the lid is opened to ensure you and your workplace remain safe
Grant Instruments refrigerated immersion coolers consist of a cooling coil connected to a refrigeration unit by a flexible pipe. Both units offer a continuous heat extraction, with the bath control unit controlling the temperature. Compatible with all four Optima thermostatic controllers: T100 TC120, TX150 TXF200.
Calibration and maintenance set with technical buffer solution for gel electrodes, 3 bottles with 1 l each: pH 4.01/ 7.00/ 10.01 Trace, 2 bottles with 250 ml 3 mol/l KCl solution.
