Hanna Instruments
HI-2202 Edge blu pH Bluetooth Meter with HALO electrode
Code:
HI-2202-02
£473.70 Vat Excl.
Dispatched within 3-5 working days
Hanna Instruments edge®blu kit includes a HALO™ HI-11102 gel-filled Bluetooth® electrode, a high quality, double junction, glass pH probe with a built-in temperature sensor that can be used virtually anywhere: in the field, laboratory or classroom.
Benefits
HALO™ HI-11102 gel-filled Bluetooth electrode
Two USB ports
Store up to 1000 log records of data
GLP Data of the last calibration you perform is stored
Capacitive touch keypad
Easy to read 14 cm LCD with wide 150deg. viewing angle
CAL Check™ technology to warn you if the electrode bulb is not clean or if the buffers are contaminated during calibration
The versatile design of Hanna HI-2202 edge blu pH Bluetooth Meter allows it to be used as a portable, wall-mount or benchtop meter. Clearing the clutter, edge blu sees the end of trailing cables by wirelessly connecting to the pH electrodes with Bluetooth Smart technology. Operate up to 10m distance from compatible pH electrodes for versatile measurement in the lab or field.
Specifications
pH Range Basic mode: -2.00 to 16.00 pH; standard mode: -2.000 to 16.000 pH
Resolution
0.001 pH, 0.01 pH
Accuracy (@25℃)
±0.01 pH, ±0.002 pH
Temperature Range -20.0 to 120.0℃
Resolution
0.1℃
Accuracy
±0.5℃
Dimensions 202 x 140 x 12 mm
Weight 250g
Reference
HI-2202-02
Data sheet
Industries
Scientific Industries
16 other products in the same category:
£320.00 vat excl.
£384.00 vat Inc.
Availability: 48 In Stock
Rubber Boot protects against knocks and hits
Easy-To-Read Display
Customised LCD screen
Tactile Keypad with a simple, straight forward design for easy operation
Compact Design Fits Your Palm Perfectly - Designed for easy single-hand operation
Convenient Benchtop Stand
User-Friendly Diagnostic, easy to understand trouble-shooting prompts
Splashproof & Shock-Resistant Built with shock-resistant
ABS plastic and protected by an IP54-rated housing against accidental splashes
Hold function freezes readings momentarily for easy viewing and recording
Energy and Cost Saving - Switches off automatically after 20 minutes of inactivity
Automatic Temperature Compensation
Accurate readings, even under varying temperature conditions
Non-Volatile Memory -Meter settings are saved, even when batteries run out
£594.80 vat excl.
£713.76 vat Inc.
Availability: 20 In Stock
User-friendly two-button design
Application-specific probe
Durable IP67 waterproof casing
Watertight probe connection
Probe condition indicator
£289.65 vat excl.
£347.58 vat Inc.
Availability: 20 In Stock
Spherical glass tip
3.5 connection
Easy to use
Glass electrode body
Double junction reference
CPS sleeve junction
6 months warranty
£568.70 vat excl.
£682.44 vat Inc.
Availability: 20 In Stock
Clogging Prevention System (CPS™)
Automatic Temperature Compensation (ATC)
Two-point calibration
Battery Error Prevention System (BEPS) - alerts the user of low battery power that could adversely affect readings
Simultaneous pH and temperature measurements on a large dual-line LCD display
User-friendly two-button design
Application-specific probe
Durable IP67 waterproof casing
Watertight probe connection
Probe condition indicator
Automatic pH calibration at one or two points within two memorized buffer sets (standard or NIST)
On-screen calibration tags
mV of pH measurement for electrode check
Selectable temperature unit (℃ or ∞F)
Auto-off function
Battery life indication and low battery detection
£356.67 vat excl.
£428.00 vat Inc.
Availability: 50 In Stock
High pH accuracy of ±0.01
Self-diagnostic messages for easy troubleshooting
Measures ORP in addition to pH and Temperature
Rubber Boot protects gainst knocks and hits
Easy-To-Read Display
Customised LCD screen
Tactile Keypad with a simple, straight forward design for easy operation
Compact Design Fits Your Palm Perfectly - Designed for easy single-hand operation
Convenient Benchtop Stand
User-Friendly Diagnostic, easy to understand trouble-shooting prompts
Hold function freezes readings momentarily for easy viewing and recording
Energy and Cost Saving - Switches off automatically after 20 minutes of inactivity
Automatic Temperature Compensation
Accurate readings, even under varying temperature conditions
Non-Volatile Memory -Meter settings are saved, even when batteries run out
£808.40 vat excl.
£970.08 vat Inc.
Availability: 20 In Stock
Waterproof - IP67 rated
CAL Check™
Automatic or manual temperature compensation
Calibration
200 hour battery life approx - 1.5V AA batteries (x4)
Clear display
Auto hold
Calibration timeout
PC Connectivity via USB
GLP
Intuitive keypad
Carry case and accessories
£550.90 vat excl.
£661.08 vat Inc.
Availability: 50 In Stock
Simultaneous pH, ORP and temperature measurements on a large three-line LCD display
Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
User-friendly two-button design
Selectable temperature unit (℃)
Electrode condition indicator
mV of pH measurement for electrode check
HI-12973 dedicated pH/ORP with integral temperature sensor
Probe quick connect system
Battery life indication and low battery detection
Keystroke confirmation tone
Auto-off function
Waterproof casing IP67
£773.33 vat excl.
£928.00 vat Inc.
Availability: 50 In Stock
Up to 6-point calibration with auto-buffer recognition
Quick, easy electrode diagnosis with multiple pH slopes and offset display
Calibrate with up to 5 custom pH buffers where use any pH values that are 1.0 pH unit apart
Cal-due alarm
Auto-logging function for convenient continuous monitoring
Password protection for setup and calibration
All measurements include temperature display
Up To 500 point memory with date time stamp for GLP
Output data to printer or PC
Detachable electrode holder
Compact footprint
Custom setup
3-Year warranty
£495.00 vat excl.
£594.00 vat Inc.
Availability: 10 In Stock
Automatic pH calibration - up to 5 points (NIST, USA pH buffers) / up to 6 points (DIN pH buffers)
0.01 pH resolution
Offset and average slope display
Automatic / manual temperature compensation and temperature calibration function
ORP calibration option
°C & °F temperature readings
Auto log data; built-in memory can store up to 500 data
Auto shut-off (programmable: up to 30 minutes)
Auto stable, auto hold, and real time measurement modes
Calibration alarm (programmable: up to 90 days)
Built-in electrode holder allows 2 electrodes to be attached
Monochrome LCD with white LED backlight: 50 x 50 mm
Casing is IP67 waterproof/dustproof, shock & scratch resistant, non-slip
Powered by 2 x AA batteries
Packaged with electrode and calibration solutions in carrying case
3 years meter warranty
New
£134.00 vat excl.
£160.80 vat Inc.
Availability: 10 In Stock
Replacement Gel probe for pH1000A meter
£808.40 vat excl.
£970.08 vat Inc.
Availability: 20 In Stock
Waterproof
Automatic or manual temperature compensation
Calibration
200 hour battery life approximately with 1.5V AA batteries (x4)
Clear display
Auto hold
Calibration timeout
PC Connectivity via USB
GLP
Intuitive keypad
Carry case and accessories
£215.00 vat excl.
£258.00 vat Inc.
Availability: 20 In Stock
pH measuring range 0 to 14
Gel electrolyte
Plastic shaft
Integrated temperature sensor
Safely measured values due to signal processing in the sensor
Easy electrode replacement thanks to calibration data stored inside sensor
Sensor quality monitoring by QSC function
Memory for 10 calibration records
QSC function
New
£480.00 vat excl.
£576.00 vat Inc.
Availability: 10 In Stock
Puncture knife, made of stainless steel, for pH measurement of meat, cheese, fruits with a pH electrode model SenTix™ Sp or SenTix Sp-T 900, robust blade with adapted cut-out.
Buy together with XYL-WTW-103730 to use as a puncture knife pH probe.
£60.00 vat excl.
£72.00 vat Inc.
Availability: 46 In Stock
Pocket-sized pH meter, ideal for everyday use
Automatic calibration feature
Easy to read 8 mm LCD display
Display hold function
Temperature operating range 0 to 50℃
£473.70 vat excl.
£568.44 vat Inc.
Availability: 13 In Stock
8 hour battery life
Dual USB ports
5.5 inch display
3.5 mm probe input
Capacitive touch keypad
£808.40 vat excl.
£970.08 vat Inc.
Availability: 20 In Stock
Waterproof
Automatic or manual temperature compensation
Calibration
200 hour battery life approximately with 1.5V AA batteries (x4)
Clear display
Auto hold
Calibration
PC Connectivity via USB
GLP
Intuitive keypad
Carry case and accessories
This website uses cookies to ensure you get the best experience on our website.
Got it!
