Hanna Instruments
Professional Portable pH Meter for Meat
Code:
HI-98163
£808.40 Vat Excl.
Dispatched within 3-5 working days
Hanna Instruments HI-98163 is a portable pH and temperature meter designed for meat products. The HI-98163 is supplied with an FC2323 electrode, specifically made to measure pH in meat. This electrode has a conic tip and a stainless steel piercing blade to ensure easy penetration to resist clogging. It has a Polyvinylidene Fluoride (PVDF) food-grade plastic body to resist most chemicals and solvents.
The Hanna HI-98163 unique CAL Check™ alerts the user to potential problems in the calibration process. Food processors will find this very important as the probe is likely coated with the solids found in the food sample being measured. Once the probe is coated, it could lead to errors in the pH measurement. Another of the HI-98161 features is AutoHold. Once enabled it will warn the user when a reading is not within the range of calibrated pH values. The Log-on-demand mode lets the user save up to 200 samples which can then be recalled or transferred to a PC.
Model HI-98163
pH range
-2.0 to 20.0 pH; -2.00 to 20.00 pH; -2.000 to 20.000pH
pH Resolution
0.1 pH; 0.01 pH; 0.001 pH
pH Accuracy
±0.1; ±0.002 pH
pH Calibration
up to five point calibration, seven standard buffers available (1.68, 4.01, 6.86, 7.01, 9.18, 10.01, 12.45) + five custom buffers
mV range
±2000mV
mV Resolution
0.1 mV
mV Accuracy
±0.2 mV
Temperature Range
-20.0 to 120.0?C
Temperature Resolution
0.1?C
Temperature Accuracy
±0.4?C (excluding probe error)
Temperature Compensation
manual or automatic from -20.0 to 120.0?C
IP Rating
IP67
Battery Type / Life
1.5V AA batteries (4) / approximately 200 hours of continuous use without backlight (50 hours with backlight)
Environment
0 to 50?C; RH 100% (IP67)
Dimensions(WxDxH)
185 x 93 x 35.2mm
Weight
400g
Warranty
2 years (probe 6 months)
Reference
HI-98163
Data sheet
Industries
Food Production and Safety
16 other products in the same category:
£569.80 vat excl.
£683.76 vat Inc.
Availability: 19 In Stock
Application-specific electrode
Automatic temperature compensation (ATC)
Stability indicator for accurate data recording
Battery-powered
DIN connection
Simultaneous pH and temperature measurements on a large dual-line LCD display
Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
Selectable temperature unit (℃ or ∞F)
Electrode condition indicator
mV of pH measurement for electrode check
FC2423 dedicated pH with integrated temperature sensor
Probe quick connect system
Battery life indication and low battery detection
Keystroke confirmation tone
Auto-off function
Waterproof casing IP67
New
£635.00 vat excl.
£762.00 vat Inc.
Availability: 10 In Stock
For testing of waste water.
Easy-to-operate, robust pH/mV-meter with large LCD-display, for mobile routine measurement.
Meter in carry case with
pH-sensor SenTix™ 41
buffer solution STP 4 and STP 7
stand, beaker
short instruction manual
CD-ROM and batteries
Handy case sets for field applications
The ProfiLine handhelds are available as single instruments in a case without measurement accessories, but also as sets supporting individual application requirements.
The case also serves as a small field laboratory.
£312.30 vat excl.
£374.76 vat Inc.
Availability: 20 In Stock
Stainless steel blade
3.5 connection
easy to use
PVDF construction
£134.57 vat excl.
£161.48 vat Inc.
Availability: 47 In Stock
Large double line LCD display with backlight
Display closer to the surface of tester for a better viewing angle
Simultaneous display of measurement and temperature
Easy-to-operate user interface with the addition of the MENU key
1 push calibration cap: Leakproof
Fill-line indicator for measurement
Wider, stable base to stand the tester upright
£428.00 vat excl.
£513.60 vat Inc.
Availability: 20 In Stock
pH measuring range 0 to 14
Safely measured values due to signal processing in the sensor
Easy electrode replacement thanks to calibration data stored inside sensor
Sensor quality monitoring by QSC function
IDS pH microelectrode
For measurement of small volumes and in small vessels
Diameter 5mm
QSC function
Integrated temperature sensor
Memory for 10 calibrations
£543.00 vat excl.
£651.60 vat Inc.
Availability: 50 In Stock
Simultaneous pH and temperature measurements on a large dual-line LCD display
Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
Selectable temperature unit (℃ or ∞F)
Electrode condition indicator
mV or pH measurement for electrode check
HI-12923 dedicated pH probe with integrated temperature sensor
Probe quick connect system
Battery life indication and low battery detection
Keystroke confirmation tone
Auto-off function
Waterproof casing IP67
£569.80 vat excl.
£683.76 vat Inc.
Availability: 20 In Stock
Application-specific electrode
Automatic temperature compensation (ATC)
Stability indicator for accurate data recording
Battery-powered
DIN connection
Simultaneous pH and temperature measurements on a large dual-line LCD display
User-friendly two-button design
Application-specific probe
Durable IP67 waterproof casing
Watertight probe connection
Probe condition indicator
Automatic pH calibration at one or two points within two memorized buffer sets (standard or NIST)
On-screen calibration tags
mV of pH measurement for electrode check
Selectable temperature unit (℃ or ∞F)
Auto-off function
Battery life indication and low battery detection
£356.67 vat excl.
£428.00 vat Inc.
Availability: 50 In Stock
High pH accuracy of ±0.01
Self-diagnostic messages for easy troubleshooting
Measures ORP in addition to pH and Temperature
Rubber Boot protects gainst knocks and hits
Easy-To-Read Display
Customised LCD screen
Tactile Keypad with a simple, straight forward design for easy operation
Compact Design Fits Your Palm Perfectly - Designed for easy single-hand operation
Convenient Benchtop Stand
User-Friendly Diagnostic, easy to understand trouble-shooting prompts
Hold function freezes readings momentarily for easy viewing and recording
Energy and Cost Saving - Switches off automatically after 20 minutes of inactivity
Automatic Temperature Compensation
Accurate readings, even under varying temperature conditions
Non-Volatile Memory -Meter settings are saved, even when batteries run out
£808.40 vat excl.
£970.08 vat Inc.
Availability: 20 In Stock
Waterproof
Automatic or manual temperature compensation
Calibration
200 hour battery life approximately with 1.5V AA batteries (x4)
Clear display
Auto hold
Calibration
PC Connectivity via USB
GLP
Intuitive keypad
Carry case and accessories
£495.00 vat excl.
£594.00 vat Inc.
Availability: 10 In Stock
Automatic pH calibration - up to 5 points (NIST, USA pH buffers) / up to 6 points (DIN pH buffers)
0.01 pH resolution
Offset and average slope display
Automatic / manual temperature compensation and temperature calibration function
ORP calibration option
°C & °F temperature readings
Auto log data; built-in memory can store up to 500 data
Auto shut-off (programmable: up to 30 minutes)
Auto stable, auto hold, and real time measurement modes
Calibration alarm (programmable: up to 90 days)
Built-in electrode holder allows 2 electrodes to be attached
Monochrome LCD with white LED backlight: 50 x 50 mm
Casing is IP67 waterproof/dustproof, shock & scratch resistant, non-slip
Powered by 2 x AA batteries
Packaged with electrode and calibration solutions in carrying case
3 years meter warranty
£60.00 vat excl.
£72.00 vat Inc.
Availability: 46 In Stock
Pocket-sized pH meter, ideal for everyday use
Automatic calibration feature
Easy to read 8 mm LCD display
Display hold function
Temperature operating range 0 to 50℃
£48.64 vat excl.
£58.37 vat Inc.
Availability: 44 In Stock
Easy to use
Non-volatile memory
Large, upright LCD
Click-lock battery compartment
Easy push-button calibration
Transparent protective cap
±0.1 % accuracy across full pH range
Auto-buffer recognition
Auto-calibration functions
Long-lasting sensor
£473.80 vat excl.
£568.56 vat Inc.
Availability: 50 In Stock
pH / mV / Temperature Best value for an IP67-rated waterproof pH meter
Large, three-line LCD – View pH or mV measurement with temperature and % slope
Built-in memory function – Stores up to 150 measurements along with temperature
Auto buffer recognition – Automatically identifies USA, NIST or DIN buffer sets for rapid calibration
Power with AA batteries or use optional AC adapter for benchtop measurements
Calibration due alarm – Set a visible reminder when it is time to recalibrate the meter
Selectable ºF/ºC – Choose units to best fit your application
Features mV offset – Calibrate to a Redox/ORP standard or use for pH electrode diagnostics
Ready indicator, manual or automatic measurement hold feature and optional automatic shutoff function
% slope and temperature displayed with each measurement
Built-in stand – Ideal for easy benchtop or long-term use
Wall-mount option – Ideal to save on bench space
Includes innovative Grip-Clip™ – Quickly and easily secures the electrode to your beaker or container
Compatible with pH electrodes having a BNC connector
£600.75 vat excl.
£720.90 vat Inc.
Availability: 20 In Stock
The electrode FC2023 dedicated pH with an integral temperature sensor
Probe quick connect system
Battery life indication and low battery detection
Keystroke confirmation tone
Auto-off function
Waterproof casing IP67
£59.00 vat excl.
£70.80 vat Inc.
Availability: 40 In Stock
Easy to use
Non-volatile memory
Large, upright LCD
Click-lock battery compartment
Easy push-button calibration
Transparent protective cap
±0.1 % accuracy across full pH range
Auto-buffer recognition
Auto-calibration functions
Long-lasting sensor
£445.20 vat excl.
£534.24 vat Inc.
Availability: 50 In Stock
Simultaneous pH and temperature measurements on a large dual-line LCD display
Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
Selectable temperature unit (℃)
Electrode condition indicator
mV of pH measurement for electrode check
HI-12963 dedicated pH with an integral temperature sensor
Probe quick connect system
Battery life indication and low battery detection
Keystroke confirmation tone
Auto-off function
Waterproof casing IP67
This website uses cookies to ensure you get the best experience on our website.
Got it!