Hanna Instruments HI-98165 is a portable pH and temperature meter designed for cheese products. The HI-98165 is supplied with an FC2423 electrode, specifically made to measure pH in cheese. This electrode has a conic tip shape for easy penetration and is 5mm in diameter so it doesn't leave a large hole. The electrode connects with the meter via a waterproof DIN connector. The user can test throughout the production process using the conical sensing tip paired with the robust sheath.
The Hanna HI-98165 unique CAL Check™ alerts the user to potential problems in the calibration process. Food processors will find this very important as the probe is likely coated with the solids found in the food sample being measured. Once the probe is coated, it could lead to errors in the pH measurement. Another of the HI-98165 features is AutoHold. Once enabled it will warn the user when a reading is not within the range of calibrated pH values. The Log-on-demand mode lets the user save up to 200 samples which can then be recalled or transferred to a PC.
Model
HI-98165
pH range
-2.0 to 20.0 pH; -2.00 to 20.00 pH; -2.000 to 20.000pH
pH Resolution
0.1 pH; 0.01 pH; 0.001 pH
pH Accuracy
±0.1; ±0.002 pH
pH Calibration
up to five point calibration, seven standard buffers available (1.68, 4.01, 6.86, 7.01, 9.18, 10.01, 12.45) + five custom buffers
mV range
±2000mV
mV Resolution
0.1 mV
mV Accuracy
±0.2 mV
Temperature Range
-20.0 to 120.0?C
Temperature Resolution
0.1?C
Temperature Accuracy
±0.4?C (excluding probe error)
Temperature Compensation
manual or automatic from -20.0 to 120.0?C
IP Rating
IP67
Battery Type / Life
1.5V AA batteries (4) / approximately 200 hours of continuous use without backlight (50 hours with backlight)
Our standard delivery is 3-5 working days (where products are available) Monday to Friday, excluding public holidays when you order by 2pm. Details of our returns and cancellation policy can be found in our Returns Policy & Section 11 of our Terms and Conditions. For more information please contact us on 01924 444 577 or Email Us.
HORIBA's highly-sensitive, flat sensor technology opens up new possibilities for sampling and sample types. Only a small amount of sample is required, so you can easily sample in situ without the need for beakers or other labware.
Sensors are easily replaced as required.
Measure even smaller samples with the LAQUAtwin sampling sheet.
The sampling sheet allows trace volumes to be analysed. For example, you can even measure the pH of human skin by wiping with a sampling sheet soaked in pure water, and placing it on the sensor.
Using the HORIBA sampling sheet, volumes down to 0.05 ml can be tested (except for conductivity measurements).
Carry case comes as standard for handy portability.
The compact carry case contains everything you need for your measurements, including the standard solution and sampling sheets.
