Hanna Instruments HI-99165 is a pH and temperature meter designed for cheese analysis. The HI-99165 is supplied with an FC2423 probe which is specifically designed to measure the pH in cheese products. A crucial factor when producing consistent and quality cheese is monitoring the pH. Cheese producers have to monitor the pH levels from the initial measurements of incoming milk through to the final measurements of ripened cheese.
Benefits
Application-specific electrode
Automatic temperature compensation (ATC)
Stability indicator for accurate data recording
Battery-powered
DIN connection
Simultaneous pH and temperature measurements on a large dual-line LCD display
Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
Selectable temperature unit (℃ or deg. F)
Electrode condition indicator
mV of pH measurement for electrode check
FC2423 dedicated pH with integrated temperature sensor
Probe quick connect system
Battery life indication and low battery detection
Keystroke confirmation tone
Auto-off function
Waterproof casing IP67
What's included with the meter:
FC2423 pH electrode with internal temperature sensor
HI-70004 pH 4.01 buffer sachet
HI-70007 pH 7.01 buffer sachet
HI-700643 electrode cleaning solution sachets (2)
Alkaline batteries: 1.5V AAA x 3
Rugged carrying case
Instruction manual
The internal temperature sensor in the FC2423 electrode automatically compensates pH readings. The FC2423 has a conical sensing tip for easy penetration into solids and emulsions. It has been designed to prevent clogging, ensure a fast response and a stable reading.
Model
HI-99165
pH range
-2.0 to 16.00 pH
pH Resolution
0.01 pH
pH Accuracy
±0.02 pH
Calibration
automatic, one or two-point selectable buffer set standard pH 4.01, 7.01, 10.01 or NIST pH 4.01, 6.86, 9.18
Temperature Compensation
automatic from -5.0 to 105.0℃
Temperature Range
-5.0 to 105.0?C
Temperature Resolution
0.1?C
Accuracy
±0.5℃ (up to 60℃); ±1.0℃ (outside)
IP Rating
IP67
Battery Type / Life
3 x 1.5V AAA / approx. 1400 hours of continuous use
Our standard delivery is 3-5 working days (where products are available) Monday to Friday, excluding public holidays when you order by 2pm. Details of our returns and cancellation policy can be found in our Returns Policy & Section 11 of our Terms and Conditions. For more information please contact us on 01924 444 577 or Email Us.
Replacement sensor for the B-713, pH 11, ph 22, pH 33
Employing the same test principle as standard laboratory electrodes, the LAQUAtwin packs all components into a flat sensor that’s less than 1 mm thick.
Backlit, rugged waterproof meter is ideal for any environment
Durable waterproof and dustproof design with IP67 rating
Large, backlit display – View measurement with temperature and % slope
Grip-Clip™ – Quickly and easily secures the pH electrode to your beaker or container
Calibrate up to 5 points automatically with USA or NIST buffer groups (up to 6 points with DIN). New manual option allows calibration with up to 5 custom buffer standards
Intuitive, user-friendly icons – Electrode status displays pH slope
Store up to 500 data sets – Easy USB or RS232 output with optional data cables
Built-in real-time clock stamps stored data and calibration data with time and date – Meets standards for GLP (Good Laboratory Practices)
Built-in stand with wall-mount option – Allows for easy benchtop measurement or storage
Compatible with pH, ORP or ISE electrodes having a BNC connector
This website uses cookies to ensure you get the best experience on our website.