• Y046 Sampling Sheet B
• Contains 100 pcs. / box
• Use for minute samples (minimum of 0.05 ml) and particulate-containing samples (e.g., soil extract). For the latter, please use sampling sheet holder and cover the sensor during measurement.
• For LAQUAtwin and Twin pocket meters, except conductivity and salt EC models

• pH measuring range 0 to 14
• IDS pH combination electrode with gel electrolyte, plastic shaft and integrated temperature sensor
• Safely measured values due to signal processing in the sensor
• Easy electrode replacement thanks to calibration data stored inside sensor
• Sensor quality monitoring by QSC function

• 514-22 1.41 mS/cm (1413µS/cm) Conductivity Standard Solution 
• 14-ml x 6 bottles
• For LAQUAtwin B-771, EC-11, EC-22, EC-33

• Easy to use
• Wireless
• Connects to MultiLine® 3310/3510/36x0 IDS
• Connects to inoLab® Multi IDS
• Connects to MonoLine
• Full complete wireless module kit available

• pH measuring range 0 to 14
• Safely measured values due to signal processing in the sensor
• Easy electrode replacement thanks to calibration data stored inside sensor
• Sensor quality monitoring by QSC function
• IDS pH microelectrode
• For measurement of small volumes and in small vessels
• Diameter 5mm
• QSC function
• Integrated temperature sensor
• Memory for 10 calibrations

Spear-type pH combination electrode for penetration measurements in meat, fruit and cheese, with fixed cable and waterproofed DIN plug.

Buy together with XYL-WTW-903843 to use as a puncture knife pH probe.

• Recommended operating temperature: -5 to 70℃
• pH range: pH: 0 to 12
• Glass body material
• Supplied with BNC connector
• Supplied with 1m cable
• Suitable for pH measurement

• Replacement sensor for LAQUAtwin B-771, EC-11, EC-22, and EC-33
• Requires a minimum of 0.12 ml sample
• Corrosion-resistant titanium / platinum black cell material
• Waterproof

• Replacement sensor for LAQUAtwin B-721 and Salt-22
• Requires a minimum of 0.3 ml sample with direct measurement (0.05 ml sample with sampling sheet B)
• Sensor guard has a sliding cap for scooping water sample
• Waterproof

• Conic tip
• 3.5 connection
• Easy to use
• Glass body
• 6 months warranty

• 514-20 Conditioning Solution
• 14-ml x 6 bottles
• For LAQUAtwin EC-11, EC-22, EC-33, Salt-11

• Replacement sensor for the B-713, pH 11, ph 22, pH 33
• Employing the same test principle as standard laboratory electrodes, the LAQUAtwin packs all components into a flat sensor that’s less than 1 mm thick.
• Waterproof construction protects the instrument.

Replacement sensor for ELITEPH Tester

Calibration Kit Set for TN100IR (0.02, 20.0, 100, 800 NTU), 4x60mL

Calibration and maintenance set with technical buffer solution for gel electrodes, 3 bottles with 1 l each: pH 4.01/ 7.00/ 10.01 Trace, 2 bottles with 250 ml 3 mol/l KCl solution.

• 1.5 m in length
• Other lengths available
• Waterproof connection between plug and meter (IP67)
• Pressure resistant connection between sensor and cable plug (IP 68, 10 bar)
• Tearproof design