• Recommended operating temperature: -5 to 70℃
• pH range: pH: 0 to 12
• Glass body material
• Supplied with BNC connector
• Supplied with 1m cable
• Suitable for pH measurement

Calibration Kit Set for TN100IR (0.02, 20.0, 100, 800 NTU), 4x60mL

Spear-type pH combination electrode for penetration measurements in meat, fruit and cheese, with fixed cable and waterproofed DIN plug.

Buy together with XYL-WTW-903843 to use as a puncture knife pH probe.

• Replacement sensor for LAQUAtwin B-751 and Ca-11
• Requires a minimum of 0.3 ml sample with direct measurement (0.05 ml with sampling sheet B)
• Sensor guard has a sliding cap for scooping water sample
• Waterproof

• Replacement sensor for the B-713, pH 11, ph 22, pH 33
• Employing the same test principle as standard laboratory electrodes, the LAQUAtwin packs all components into a flat sensor that’s less than 1 mm thick.
• Waterproof construction protects the instrument.

• 514-20 Conditioning Solution
• 14-ml x 6 bottles
• For LAQUAtwin EC-11, EC-22, EC-33, Salt-11

Calibration and maintenance set with technical buffer solution for gel electrodes, 3 bottles with 1 l each: pH 4.01/ 7.00/ 10.01 Trace, 2 bottles with 250 ml 3 mol/l KCl solution.

• Easy to use
• Wireless
• Full complete wireless module kit available

• 514-22 1.41 mS/cm (1413µS/cm) Conductivity Standard Solution 
• 14-ml x 6 bottles
• For LAQUAtwin B-771, EC-11, EC-22, EC-33

• Replacement sensor for the B-741,B-742,B-743,B-341,342,343
• Flat electrode for nitric ion which is so selective that pH or other ions do not affect it.

• Y046 Sampling Sheet B
• Contains 100 pcs. / box
• Use for minute samples (minimum of 0.05 ml) and particulate-containing samples (e.g., soil extract). For the latter, please use sampling sheet holder and cover the sensor during measurement.
• For LAQUAtwin and Twin pocket meters, except conductivity and salt EC models

• Replacement sensor for LAQUAtwin B-771, EC-11, EC-22, and EC-33
• Requires a minimum of 0.12 ml sample
• Corrosion-resistant titanium / platinum black cell material
• Waterproof

• Replacement sensor for LAQUAtwin Salt-11
• Requires a minimum of 0.12 ml sample
• Corrosion-resistant titanium / platinum black cell material
• Waterproof

• pH measuring range 0 to 14
• IDS pH combination electrode with gel electrolyte, plastic shaft and integrated temperature sensor
• Safely measured values due to signal processing in the sensor
• Easy electrode replacement thanks to calibration data stored inside sensor
• Sensor quality monitoring by QSC function

• Easy to use
• Wireless
• Connects to MultiLine® 3310/3510/36x0 IDS
• Connects to inoLab® Multi IDS
• Connects to MonoLine
• Full complete wireless module kit available

• Spherical glass tip
• 3.5 connection
• Easy to use
• Glass electrode body
• Double junction reference
• CPS sleeve junction
• 6 months warranty